Custom Kitchen Cabinets, Refacing and Refinishing in Bluffdale, UT

Custom Cabinets
Custom Cabinets and Cabinet Installation in Bluffdale, UT
New Cabinets, Semi-Custom, Refacing or Refinishing
There are four ways to change the cabinets in a kitchen, and they differ by a factor of ten in cost. The right one depends on the condition of the boxes and whether the layout is part of the problem.
Custom Cabinets Built to Your Kitchen
Built to your exact dimensions in any style and any finish. Worth it when standard sizes would leave filler panels on show, when a ceiling is unusually high, or when a corner would otherwise be dead space. Four to eight weeks from approved design to installation.
Semi-Custom Cabinets
Manufacturer standard sizes with your choice of door style and finish, modified in depth or width where the room needs it. The sensible choice for a kitchen keeping its existing footprint, and roughly a third of the cost of fully custom.
Cabinet Refacing
New doors, drawer fronts and hardware, with matching veneer over the boxes you already have. The style changes completely and the kitchen stays usable throughout. Only works where the carcasses are solid, square and still firmly fixed to the wall.
Cabinet Refinishing and Painting
Keep the doors and change the colour. Refinishing strips solid wood back and restains it so the grain stays visible. Painting covers the grain in a new colour. Both are the cheapest meaningful change a kitchen can have, and both are finished in days rather than weeks.
What Custom Kitchen Cabinets Cost in the Salt Lake Valley
What Kitchen Cabinets Cost in the Salt Lake Valley
Typical market ranges for 2026, priced per linear foot of cabinet run and for a standard 25 to 30 foot kitchen. These are not Build Right prices. Your written estimate comes from the free in-home survey.
| Route | Per linear foot | Typical kitchen | Lead time | Install time |
|---|---|---|---|---|
| Cabinet painting | $90 – $200 | $2,500 – $6,000 | 1–2 weeks | On site throughout |
| Cabinet refinishing | $140 – $280 | $3,500 – $8,000 | 2–3 weeks | 2–3 days |
| Cabinet refacing | $150 – $450 | $4,000 – $13,000 | 2–4 weeks | 3–4 days |
| Semi-custom cabinets | $150 – $650 | $5,000 – $19,000 | 4–6 weeks | 3–5 days |
| Custom cabinets | $500 – $1,200 | $15,000 – $35,000 | 4–8 weeks | 3–5 days |
Cabinetry is normally the largest single line in a kitchen budget, around 30 to 40 percent of the total. It is also the longest lead item, which is why it is ordered first and the rest of the schedule is built backwards from its delivery date. Interior fittings such as pantry pull-outs, drawer organisers and corner solutions are priced separately.
Cabinet Refacing
Cabinet Refacing in Bluffdale
The limit is the boxes. Particleboard that has swollen under a sink leak, shelves that sag, or carcasses that have worked loose from the wall will not hold new doors any better than they hold the old ones. Refacing also cannot fix a layout. If the kitchen fights you every time you cook, new cabinetry is the honest answer and we will say so.
- Doors and drawer fronts in any style we build new, including shaker, slab and inset
- Soft-close hinges and runners fitted as standard, even where the originals had none
- Interior upgrades possible at the same time: pull-outs, drawer organisers, corner solutions


Refinishing and Painting
Cabinet Refinishing and Kitchen Cabinet Painting
Painted kitchen cabinets have been the most requested finish for a decade and show no sign of changing. White and off-white dominate, but deep greens, navies and warm greys all hold up well against Utah light, which is harsher and more direct than most of the country. Two-tone kitchens, with painted uppers over a stained or darker base, split the difference and are covered in the next section.
- Doors sprayed in the shop, frames finished on site with the room fully masked
- Hardware holes filled and redrilled where handle positions change
- One to three weeks start to finish, and the kitchen stays usable throughout
Refacing, Refinishing, Painting or New Cabinets
The four routes do different jobs and cost very different amounts. This is the decision that shapes a kitchen budget more than any other, and it is usually made before anyone has explained the difference.
| Option | What changes | What stays | Typical cost | Choose it when |
|---|---|---|---|---|
| Painting | Colour only. Grain is covered | Boxes, doors, drawers, hardware, layout | $2,500 – $6,000 | The doors are sound and you only want a different colour |
| Refinishing | Stain or lacquer. Grain stays visible | Boxes, doors, drawers, layout | $3,500 – $8,000 | The doors are solid wood and worth keeping on show |
| Refacing | Doors, drawer fronts, hardware, visible surfaces | Boxes and layout | $4,000 – $13,000 | The boxes are solid but the doors are dated or damaged |
| Semi-custom cabinets | Everything except the footprint | Where the runs sit in the room | $5,000 – $19,000 | You want new cabinets without moving anything |
| Custom cabinets | Everything, including sizes and layout | Nothing has to | $15,000 – $35,000 | The layout is wrong, or the room has awkward dimensions |
Two things rule out the first three routes regardless of budget. If the layout itself is the problem, no amount of refinishing fixes it. And if the boxes are particleboard that has swollen under a leak or shelves that sag, a new face on a failing carcass buys a few years at most. We open a cabinet at the survey and tell you which group yours falls into.
Shaker, White Oak and Two-Tone Kitchen Cabinet Design
Door style sets the character of a kitchen more than the colour does, and it is the one decision that is genuinely hard to change later. Here is what we build most and what each one is actually good at.
Shaker Cabinets
A five-piece door with a flat recessed centre panel and a plain square frame. Roughly two hundred years old and in continuous use that whole time, which is the strongest argument any kitchen style has against dating. Takes paint and stain equally well, suits traditional and modern rooms, and has nowhere for grease to collect.
White Oak Cabinets
Open-grained, pale and warm, with enough texture to carry a kitchen without a second material. White oak has replaced walnut as the wood people ask for by name, and it holds up well in Utah's dry air because quarter-sawn boards move less than most species through a winter.
Two-Tone Kitchen Cabinets
Painted uppers over a stained or darker base, or an island in a contrasting colour. It breaks up a long run visually and lets a kitchen carry a strong colour without the room closing in. The usual mistake is choosing both tones separately rather than as a pair.
Painted Kitchen Cabinets
The most requested finish for a decade. Whites and off-whites dominate, though deep greens, navies and warm greys all hold up well against direct Utah light. Sprayed in the shop rather than brushed on site, which is what separates a finish that lasts from one that shows every mark.
High-End and Luxury Kitchen Cabinets
Inset doors fitted flush within the frame, hardwood dovetailed drawer boxes, integrated appliance panels and bespoke interior fittings. Tolerances are far tighter than on overlay doors, which is where the extra cost actually goes rather than into the material itself.
Soft-Close Hardware and Interior Fittings
Soft-close hinges and full-extension runners fitted as standard on everything we build, including refaced cabinets that never had them. Pantry pull-outs, deep drawer banks for pans, corner solutions and drawer organisers planned around what you actually store.
Choose Us
Our Cabinet Design and Installation Process in Bluffdale
The same seven stages we run on every Build Right project. On a cabinetry job the first two carry most of the weight, because everything after them is manufacturing to a drawing that was either right or wrong before the wood was cut.
Site Survey
We measure the room properly, checking walls for plumb, floors for level and ceilings for run, because almost none of them are true in a real house. We open a cabinet to look at the carcass rather than the door, check how the existing runs are fixed, and establish whether refacing is realistic before anything is designed.
Design
Layout, door style, finish, storage and hardware planned around how the household actually uses the room. You see visuals and a confirmed budget before a single board is cut. This is the stage where an awkward corner either becomes usable storage or stays dead space for the next twenty years.
Permitting
Cabinetry on its own rarely needs a permit. It needs one when the work moves plumbing or electrical, or when the cabinets form part of a wider remodel that already carries one. Where a permit is required we prepare the documents, submit them and pull it in our own name.
Demolition
Old cabinets removed with worktops and flooring protected, or for a refacing job, doors and drawer fronts taken off while the boxes stay in place. Anything hidden behind a run, old leaks, damaged drywall, redundant pipework, shows itself here and gets dealt with before new cabinetry goes anywhere near it.
Construction
Cabinets built in the shop to the approved drawing, or for refinishing and refacing, doors stripped and sprayed in a controlled environment rather than in your kitchen. Shop time is where the quality is decided. Site time just reveals whether the measuring was right.
Finishes
Cabinets set, levelled, shimmed and scribed to the wall so the run reads straight even where the wall is not. Hardware fitted, doors and drawers aligned, soft-close adjusted. Filler panels, where any are needed, cut to match rather than improvised.
Handover
Final walkthrough, written care instructions for your finish, warranty activation and a scheduled follow-up visit. Doors settle in the first few weeks as the house moves, so the follow-up exists to realign anything that has shifted rather than to tick a box.
Our Work
Recent Cabinet Projects From Our Bluffdale Shop

Custom Build Around an Awkward Room
A kitchen with a nine-foot ceiling, a chimney breast in the middle of the main run and not one square wall. Built to measure, carried to the ceiling, with the chimney framed into a usable pantry rather than boxed around. No filler panels anywhere a visitor would see one.

Refaced, Not Replaced
Solid maple boxes in good condition behind doors from the late nineties. Doors and fronts replaced in painted shaker, soft-close fitted throughout, veneer matched to the new doors. The homeowner kept the carcasses and spent the difference on the countertops instead.

Two-Tone With White Oak
Painted uppers in a warm off-white over a white oak base and island, chosen as a pair rather than separately. Quarter-sawn boards on the island fronts so the grain reads consistently, and integrated panels on the fridge and dishwasher.

Chief Executive Officer
Chris
Chris brings over 18 years of construction experience, managing projects from residential remodels through large-scale hotel builds across the United States, England, Spain and China. Hotel work is thousands of identical units fitted to a fixed tolerance, and that is where the habit of measuring the room rather than trusting the drawing comes from.

Flooring Specialist
Jason
Jason specialises in luxury vinyl plank, tile, carpet and floor preparation, with six years in the trade. Cabinets sit on the floor, so a run installed over an unlevel subfloor will never read straight no matter how well it was built. Getting the floor right first is part of getting the cabinets right.

Flooring Expert
Jason
Jason is a skilled flooring professional with 6 years of experience specializing in LVP, tile, carpet, and floor preparation. Known for his attention to detail and excellent customer service, Jason ensures every project is completed with precision and care.
FAQS
Common Questions About Custom Kitchen Cabinets
Below are the questions homeowners ask most before committing to cabinetry. If something is not covered here, call 801-419-6696 or read more on our FAQ page.
What is the difference between cabinet refacing, refinishing and painting?
How much do custom kitchen cabinets cost in Bluffdale?
How long do custom kitchen cabinets take?
Can my existing cabinets be refaced, or do they need replacing?
What is the difference between custom and semi-custom cabinets?
What are shaker cabinets, and will they date?
Do you handle cabinet installation as well as the cabinetry itself?
Do you make bathroom vanities and cabinetry for other rooms?
Talk to a Cabinet Installer Near You in Bluffdale
Book a free in-home survey and we will measure the room, look at the boxes you already have and tell you honestly whether to reface, refinish or replace. Written estimate itemised line by line, no pressure to sign on the day. We fit cabinetry across Bluffdale, Salt Lake City and the rest of the valley. Cabinets also run alongside a full home remodel where the whole house is being done at once. Call 801-419-6696.
